Skip to content

Formulated and handmade in Lausanne · 60-day money-back guarantee

Popular searches

← All articles

Which sun protection should I choose?

Comment choisir sa crème solaire ? Mon avis sur les filtres minéraux, les nanoparticules et les controverses
I am often asked questions about sunscreen or how to choose the right sunscreen. With the arrival of sunny days and the beginning of summer, I decided to write an article on the subject. First, here are some important principles to follow.
  • Try not to expose yourself between 11am and 3pm. This is when the rays are most powerful.
  • Prioritize your protection. First, seek dense shade and use protective clothing.
  • If you expose yourself to the sun, it is essential to protect yourself. In addition to being very dangerous for our skin and our body, the sun is also the number 1 factor in the aging of our skin.
The body needs sunlight to synthesize vitamin D but ½ hour a day should be sufficient in the morning or late afternoon. There are 2 types of sunscreens:
  • Chemical filters
  • Mineral filters (physical protection)

Here are the main differences and recommendations:

Chemical filters
They absorb the sun's rays and neutralize them before they reach the epidermis. Various studies have shown that some chemical filters are endocrine disruptors (which disrupt the hormonal system of our body and that of aquatic fauna). Molecules such as oxybenzone, octinoxate, octisalate, octocrylene, homosalate and avobenzone are absorbed and can be found in the blood several weeks after use. Some of these chemical filters also have the disadvantage of being allergenic. These filters must be applied 30 minutes before exposure to the sun so that they have penetrated the skin and are effective. The application must be repeated after swimming.

Mineral filters
Mineral filters are white powders (titanium dioxide or zinc oxide). They have a mirror effect and repel UV rays. The slight drawback is that they are more difficult to spread and leave white marks. However, brands have made progress and improved this aspect in recent years. To ensure better spreading, the size of the molecules has been reduced.

Since 2019, the law requires brands to indicate the word "Nano" on the label when the size of these molecules is smaller than 100nm. These molecules are suspected of crossing the skin barrier and having harmful effects on health.

There has been a lot of controversy over this topic. Actually, here is the explanation!

Until 2019, raw material manufacturers used a method called "DLS" to characterize the size of filters. Thanks to these measurements, some creams had particles/aggregates larger than 100nm. Since 2020, the legislation has used 2 new methods to characterize the size of filters: "MEB" and "ICPM". These methods subject the "aggregated filters" to violent treatments based on solvents and ultrasound, aimed at breaking their external structures to analyze only their internal structures.

However, in the final formula of a sunscreen applied to the skin, the mineral screens are not individualized; they are agglomerated and coated to form large solid clusters. They are indestructible under normal conditions of use of a sunscreen product.

The consequence? Particles that were previously measured as non-nano are now measured and identified as nano, and according to the authorities must indicate the designation [NANO]. However, they do not penetrate the skin and therefore do not pose any danger to health.

So my recommendation would be: If you buy a sunscreen with nanoparticles, make sure the brand has had an independent lab test the penetration to ensure that the titanium particles do not penetrate the layers of the epidermis and remain on the surface of the skin.

Titanium dioxide and zinc oxide are neither allergenic nor endocrine disruptors and are therefore recommended over chemical filters. I have personally tested several brands and the one I can recommend is the Acorelle brand that we have chosen to offer you on our site. It spreads reasonably well for a physical filter and has a good composition. There are certainly others. Do not hesitate to share your experiences in the comments.

Is it a good idea to make your own sunscreen? This is another question I get asked regularly. My answer is categorical!! It is definitely not a good idea. Making a sunscreen with titanium dioxide and zinc oxide requires laboratory equipment. These molecules are heavy and your kitchen mixer will not be powerful enough to effectively mix the cream and keep the molecules in suspension. So it is not a good idea to make a recipe that you found online... If you are unsure about your choices, it can always be useful to know how to read a label. The article Why and how to decipher a label will provide you with more information on the subject.

I hope this article was helpful to you and you now know how to choose the right sun protection.

References:

Real Facts about Safety and Efficacy of Zinc Oxide and Titanium Dioxide in Solar Products
https://www.ewg.org/sunscreen/report/the-trouble-with-sunscreen-chemicals/ https://www.madesafe.org/ https://pubmed.ncbi.nlm.nih.gov/31058986/ https://pubmed.ncbi.nlm.nih.gov/31961417/

Leave a comment

Your bag

  • Your bag is empty.

Total 0 CHF

60-day money-back guarantee